GLOBALfiber SC-SC/x/10/S is an OS2 simplex fiber patch cord for singlemode connections. It connects SC/UPC to SC/UPC interfaces for equipment-to-panel or panel-to-panel patching. The yellow cable helps identify the fiber connection in the rack.
Connector compatibility
Which connectors does this patch cord use? SC/UPC at end A and SC/UPC at end B. Match each end to the equipment or patch panel. UPC and APC must not be mated directly. Use singlemode optics specified for OS2 fiber. A passive patch cord does not establish the link speed or maximum transmission distance.
Key specifications
| Specification | Details |
|---|
| Product family | SC-SC/x/10/S |
|---|
| Fiber type | OS2, singlemode |
|---|
| Configuration | Simplex, one fiber |
|---|
| Connector, end A | SC/UPC |
|---|
| Connector, end B | SC/UPC |
|---|
| Fiber standard | G.652D, as stated in the product description |
|---|
| Cable diameter | 2.0 mm |
|---|
| Cable color | Yellow |
|---|
| Operating temperature | -45 to +75 °C, according to the linked series datasheet |
|---|
| Storage temperature | -45 to +85 °C |
|---|
| Length | Select the required length in the product variant list |
|---|
Installation requirements
Choose a cable length that follows the actual routing without tension. Clean and inspect connector end faces before connection, match the polish at both ends and observe the cable bend radius. For a BiDi connection, verify that both transceivers support a matching single-fiber optical link. Confirm the optical loss budget using the transceiver requirements and all cable connections.
Optical performance must be checked for the ordered connector assembly and complete link.
Technical source: Product / series datasheet.